A | 00m 28s | 0.0 ft | 0 ft | Mode | Mode changed to Motors Started |
B | 00m 28s | 0.0 ft | 0 ft | Low Risk | SD card speed low. Change card (Code: 10028). Lighting environment too dark. Vision System unavailable. Fly with caution (Code: 180037) |
C | 00m 28s | 0.0 ft | 0 ft | Low Risk | Aircraft in Warning Zone (Airport Class Airspace Unpaved Airports Power Plant). Fly with caution |
D | 00m 29s | 0.0 ft | 0 ft | Tip | Setting new Return-To-Home altitude to 90m (295 ft). Data Recorder File Index is 46. Setting new Maximum Flight Altitude to 122m (400 ft) |
E | 00m 29s | 0.0 ft | 0 ft | Mode | Mode changed to AutoTakeoff |
F | 00m 32s | 3.6 ft | 0 ft | Mode | Mode changed to P-GPS |
G | 00m 33s | 3.9 ft | 2 ft | Tip | Homepoint updated. RTH altitude adjusted to nnn (Code: 120852) |
H | 00m 59s | 38.4 ft | 386 ft | Tip | Max power load reached. Fly with caution |
I | 00m 59s | 38.4 ft | 386 ft | Low Risk | Not Enough Force/ESC Error. SD card speed low. Change card (Code: 10028). Aircraft max power load reached. Decrease altitude and fly with caution. If this issue persists, land immediately (Code: 30168). Ambient light too low. Vision system and obstac |
J | 00m 59s | 39.0 ft | 392 ft | Low Risk | Not Enough Force/ESC Error (repeated 10 times) |
K | 01m 00s | 38.7 ft | 429 ft | Low Risk | SD card speed low. Change card (Code: 10028). Lighting environment too dark. Vision System unavailable. Fly with caution (Code: 180037) |
L | 01m 00s | 36.4 ft | 440 ft | Tip | No GPS. Fly with caution |
M | 01m 00s | 36.4 ft | 440 ft | Low Risk | SD card speed low. Change card (Code: 10028). GPS signal weak. Hovering unstable. Fly with caution (Code: 30002). Lighting environment too dark. Vision System unavailable. Fly with caution (Code: 180037) |
| 01m 01s | 33.8 ft | 0 ft | Mode | Mode changed to Atti |
| 01m 01s | 33.8 ft | 0 ft | Warning | GPS signal weak. Switched to Attitude mode. Aircraft unable to hover. Fly with caution (Code: 120088) |
| 01m 01s | 33.1 ft | 0 ft | Tip | Attitude mode. Fly with caution |
| 01m 01s | 33.1 ft | 0 ft | Low Risk | Aircraft in Attitude mode. Unable to hover. Fly with caution (Code: 30004). SD card speed low. Change card (Code: 10028). Lighting environment too dark. Vision System unavailable. Fly with caution (Code: 180037). Compass or GPS signal we |
| 01m 02s | 29.9 ft | 0 ft | Mode | Mode changed to P-GPS |
| 01m 02s | 29.9 ft | 0 ft | Tip | No GPS. Fly with caution |
| 01m 02s | 29.9 ft | 0 ft | Low Risk | SD card speed low. Change card (Code: 10028). Lighting environment too dark. Vision System unavailable. Fly with caution (Code: 180037). GPS signal weak. Hovering unstable. Fly with caution (Code: 30002) |
N | 01m 02s | 28.9 ft | 455 ft | Mode | Mode changed to P-GPS |
O | 01m 03s | 31.8 ft | 478 ft | Low Risk | SD card speed low. Change card (Code: 10028). Lighting environment too dark. Vision System unavailable. Fly with caution (Code: 180037) |
P | 01m 03s | 33.5 ft | 488 ft | Tip | Max power load reached. Fly with caution |
Q | 01m 03s | 33.5 ft | 488 ft | Low Risk | Not Enough Force/ESC Error. SD card speed low. Change card (Code: 10028). Aircraft max power load reached. Decrease altitude and fly with caution. If this issue persists, land immediately (Code: 30168). Ambient light too low. Vision system and obstac |
R | 01m 03s | 33.8 ft | 492 ft | Low Risk | Not Enough Force/ESC Error |
S | 01m 03s | 33.8 ft | 493 ft | Low Risk | SD card speed low. Change card (Code: 10028). Lighting environment too dark. Vision System unavailable. Fly with caution (Code: 180037) |
| 01m 05s | 35.8 ft | 511 ft | | 64% Battery at maximum distance |
T | 01m 06s | 31.8 ft | 502 ft | Medium Risk | Detected backward shock / possible collision, aircraft is pitching sharply backwards |
U | 01m 06s | 26.9 ft | 500 ft | Medium Risk | Detected side shock / possible collision, aircraft is rolling sharply to the left |
V | 01m 07s | 5.9 ft | 487 ft | Low Risk | Not Enough Force/ESC Error. SD card speed low. Change card (Code: 10028). Aircraft max power load reached. Decrease altitude and fly with caution. If this issue persists, land immediately (Code: 30168). Ambient light too low. Vision system and obstac |
W | 01m 07s | 5.9 ft | 487 ft | Tip | Max power load reached. Fly with caution |
X | 01m 07s | 3.3 ft | 486 ft | Tip | Gimbal motor overloaded |
Y | 01m 07s | 3.3 ft | 486 ft | Low Risk | Not Enough Force/ESC Error. SD card speed low. Change card (Code: 10028). Gimbal motor overloaded. Land aircraft and check whether gimbal can rotate freely on all three axes (Code: 40003). Aircraft max power load reached. Decrease altitude and fly with caution. If this issue persists, land immediately (Code: 30168). Decrease altitude and fly wi |
Z | 01m 07s | 1.6 ft | 486 ft | Low Risk | Not Enough Force/ESC Error (repeated 3 times) |
a | 01m 08s | -4.9 ft | 485 ft | Low Risk | Not Enough Force/ESC Error. SD card speed low. Change card (Code: 10028). Gimbal motor overloaded. Land aircraft and check whether gimbal can rotate freely on all three axes (Code: 40003). Gimbal stuck. Check whether gimbal cover is removed and make |
b | 01m 08s | -6.6 ft | 485 ft | Low Risk | Not Enough Force/ESC Error (repeated 20 times) |
c | 01m 10s | -27.2 ft | 492 ft | High Risk | Not Enough Force/ESC Error. Propeller Fell Off. SD card speed low. Change card (Code: 10028). Motor idle. Check whether propellers are installed (Code: 30166). Gimbal stuck. Check whether gimbal cover is removed and make sure gimbal can rotate freely |
d | 01m 10s | -27.2 ft | 492 ft | Tip | Gimbal stuck |
e | 01m 10s | -27.2 ft | 492 ft | Tip | Gimbal motor overloaded |
f | 01m 10s | -27.2 ft | 492 ft | Low Risk | Not Enough Force/ESC Error. SD card speed low. Change card (Code: 10028). Gimbal motor overloaded. Land aircraft and check whether gimbal can rotate freely on all three axes (Code: 40003). Gimbal stuck. Check whether gimbal cover is removed and make |
g | 01m 11s | -31.2 ft | 492 ft | Tip | Gimbal stuck |
h | 01m 10s | -27.9 ft | 492 ft | Low Risk | Not Enough Force/ESC Error (repeated 18 times) |
i | 01m 12s | -32.2 ft | 494 ft | High Risk | Not Enough Force/ESC Error. Propeller Fell Off. SD card speed low. Change card (Code: 10028). Motor idle. Check whether propellers are installed (Code: 30166). Gimbal stuck. Check whether gimbal cover is removed and make sure gimbal can rotate freely |
j | 01m 12s | -32.2 ft | 494 ft | Tip | Gimbal motor overloaded |
k | 01m 12s | -32.2 ft | 494 ft | Low Risk | Not Enough Force/ESC Error. SD card speed low. Change card (Code: 10028). Gimbal motor overloaded. Land aircraft and check whether gimbal can rotate freely on all three axes (Code: 40003). Gimbal stuck. Check whether gimbal cover is removed and make |
l | 01m 12s | -32.2 ft | 494 ft | Low Risk | Not Enough Force/ESC Error (repeated 15 times) |
m | 01m 14s | -27.9 ft | 495 ft | Tip | Gimbal stuck |
n | 01m 14s | -27.9 ft | 495 ft | High Risk | Not Enough Force/ESC Error. Propeller Fell Off. SD card speed low. Change card (Code: 10028). Motor idle. Check whether propellers are installed (Code: 30166). Gimbal stuck. Check whether gimbal cover is removed and make sure gimbal can rotate freely |
o | 01m 14s | -27.2 ft | 495 ft | Tip | Gimbal motor overloaded |
p | 01m 14s | -27.6 ft | 495 ft | High Risk | Not Enough Force/ESC Error. Propeller Fell Off (repeated 11 times) |
q | 01m 15s | -22.6 ft | 497 ft | Low Risk | Not Enough Force/ESC Error. SD card speed low. Change card (Code: 10028). Gimbal motor overloaded. Land aircraft and check whether gimbal can rotate freely on all three axes (Code: 40003). Gimbal stuck. Check whether gimbal cover is removed and make |
r | 01m 15s | -22.0 ft | 496 ft | Low Risk | Not Enough Force/ESC Error (repeated 9 times) |
s | 01m 16s | -17.7 ft | 497 ft | Tip | Gimbal stuck |
t | 01m 16s | -17.7 ft | 497 ft | Low Risk | Not Enough Force/ESC Error. SD card speed low. Change card (Code: 10028). Gimbal stuck. Check whether gimbal cover is removed and make sure gimbal can rotate freely on all three axes (Code: 40002). Gimbal motor overloaded. Land aircraft and check whe |
u | 01m 16s | -17.1 ft | 496 ft | Low Risk | Not Enough Force/ESC Error |
v | 01m 16s | -16.7 ft | 496 ft | Low Risk | SD card speed low. Change card (Code: 10028). Excessive gimbal vibration. Check whether gimbal can rotate freely (Code: 40004). Gimbal motor overloaded. Land aircraft and check whether gimbal can rotate freely on all three axes (Code: 40003). Gimbal |
w | 01m 16s | -16.7 ft | 496 ft | Tip | Excessive gimbal vibration |
x | 01m 17s | -13.5 ft | 495 ft | Tip | Gimbal motor overloaded |